The 3 Top Gummy Problems & How to Fix Them

Gummy texture and appearance depend on the formulation, ingredient selection, and production process. When a batch does not turn out as expected, start by comparing your measurements and processing steps with the recipe for the specific pectin you are using.

Problem #1 – Sticky or Tacky Gummies

Sticky gummies can clump together and complicate coating, packaging, and storage. Review the batch’s final Brix and pH, ingredient proportions, curing conditions, and exposure to humidity.

How to Fix It

  • Check Brix and pH: Use a refractometer and pH meter to compare the batch with the selected product’s recipe.
  • Verify the formulation: Confirm ingredient weights and pectin usage before making adjustments.
  • Review curing and handling: Follow the recipe’s curing instructions and monitor temperature and humidity before coating or packaging.

Problem #2 – Gummies Not Setting Properly

When gummies fail to set, check whether the batch reached the selected recipe’s target Brix and final pH. The pectin type and amount, incomplete hydration, and inadequate curing can also affect the final texture.

How to Fix It

  • Check your pectin selection and usage: Confirm that the product and amount are appropriate for your formulation.
  • Measure Brix and final pH: Compare your results with the selected product’s recipe.
  • Disperse and hydrate the pectin fully: Follow the recipe’s preblending, ingredient order, mixing, and temperature instructions. Add the dry blend gradually while mixing to prevent clumps.
  • Review acid addition, depositing, and curing: Follow the selected blend’s process instructions and allow the gummies to cure before evaluating the finished texture.

Problem #3 – Grainy or Crystallized Texture

Graininess can result from incomplete pectin hydration or crystallization. Review pectin dispersion and hydration, mixing, cooking conditions, and acid-addition timing when troubleshooting this texture.

How to Fix It

  • Hydrate with care: Follow the selected recipe’s dry-blending, addition, temperature, and mixing instructions to prevent clumping and ensure full hydration.
  • Check cooking conditions: Measure Brix and cook to the selected recipe’s target. Review whether the batch was overcooked.
  • Follow the acid-addition instructions: For the HM gummy blends discussed below, add acid near the end of the process, mix thoroughly, and deposit promptly according to the selected recipe.
  • Get help with persistent issues: Contact Pacific Pectin for assistance reviewing your formula and process.

Our Best Tips for Gummy Quality

Consistent results start with accurate measurements and a process suited to the selected pectin. Record batch conditions so you can identify differences when troubleshooting.

Tip 1 – Precise Measurement and Mixing

Measure all ingredients accurately. Changes in pectin, sweeteners, water, or acid can affect the finished gummy. Use accurate scales and mixing equipment suitable for your batch size. Follow the recipe’s ingredient order and mixing instructions.

Tip 2 – Temperature Control

Cooking concentrates the batch toward its target soluble-solids level. Incomplete hydration or insufficient concentration can affect texture and setting, while overcooking can push soluble solids above target and make gummies too firm. Monitor temperature and Brix, and follow the selected recipe’s cooking and depositing instructions.

Tip 3 – pH Level Management

Use a pH meter and follow the selected pectin’s recipe for final pH and the timing of acid addition. The recipes for Pacific HM-100, HMA-100, and Sugar-Free Gummy Pectin list an ideal final pH of 3.4. Their procedures call for acid addition near the end of the process, followed by prompt depositing. HMA-100 provides less working time after acid addition than HM-100, so deposit immediately when following its procedure.

Tip 4 – Ingredient Selection and Formulation

Use ingredients and water suited to your formulation. Follow the selected blend’s recipe for ingredient proportions and processing steps. Consult Pacific Pectin when changing sweeteners, acids, active ingredients, or other components so the complete formula can be reviewed.

Tip 5 – Humidity and Curing Conditions

Follow the recipe’s curing instructions and monitor the temperature and humidity of your production and storage areas. Allow the gummies to complete the recommended curing process before coating or packaging. Curing helps moisture redistribute and texture stabilize.

Choosing the Right Pectin for Gummy Manufacturing

Choose pectin based on the complete formulation and production process. Follow the recipe and processing guidance for the specific product you select.

High Methoxyl (HM) Pectin vs. Low Methoxyl (LM) Pectin

High Methoxyl (HM) PectinLow Methoxyl (LM) Pectin
Pacific Pectin offers HM products formulated for standard and sugar-free gummy applications. Pacific HM-100, HMA-100, and Sugar-Free Gummy Pectin recipes specify a target of 78–84 Brix. Follow the selected blend’s recipe for its target and processing conditions. Brix measures soluble solids and should not be treated as simply the percentage of sugar in the formula.For gummy applications, Pacific Pectin’s LM recommendations are limited to two products used with specialty ingredients. Consult our technical team to determine whether an LM product is appropriate for your formula.

Matching Pectin Type to Your Formula

The right pectin depends on your formulation and processing requirements:

  • Standard Gummies: Use an HM pectin formulated for gummy applications and follow the selected product’s recipe.
  • Low-Sugar or Sugar-Free Gummies: Contact our technical team to select the appropriate pectin and recipe. Pacific Pectin offers an HM pectin specifically formulated for sugar-free gummy applications.
  • Formulas Containing Specialty Ingredients: Consult our technical team before selecting a pectin. Our LM gummy recommendations are limited to specific products and active-ingredient applications.

All Pacific Pectin pectins are vegan. Select the appropriate product based on your formulation and processing requirements, and evaluate the other ingredients separately when developing a vegan gummy.

Factors to Consider When Choosing Pectin

  • Desired Texture: Discuss the firmness and chew you want to achieve when selecting a pectin.
  • Processing Conditions: Consider the recipe’s cooking temperatures, °Brix, final pH, acid-addition timing, depositing conditions, and curing requirements.
  • Ingredient Selection: Share your complete ingredient list when discussing product suitability with our technical team.
  • Consumer Preferences: All Pacific Pectin pectins are vegan. For low-sugar or sugar-free gummies, work with our technical team to select a product suited to your formula.

Support for Your Gummy Formulation

Pacific Pectin can help you select a pectin and review the recipe and processing requirements for your application. Contact our technical team for product recommendations and troubleshooting support.

GET FREE SAMPLES

Experience the quality of our pectin firsthand—request free samples today to see how our products can elevate your next batch.